ETC Lane Control Sign: Pixel Cluster Mode

ETC Lane Control Sign: Pixel Cluster Mode

share

ETC Lane Control Sign: Pixel Cluster Mode

  • Parameters
  • Detail
Red X Specificat
C26-4R pixel cluster
Red X Quantity
44
Green ↓ Specification
C26-3G pixel cluster
Green ↓ Quantity
32
Viewing Distance
> 200m(dynamic)
Control Methods
RS232/RJ45/TCPIP


With the realization of ETC lane national network, highway toll has been totally electronic, because ETC lane management costs have been decreased, vehicle operating efficiency has been improved, toll noise and emissions has been reduced, lane capacity has been greatly improved. Using ETC lane adjust the traffic flow, to achieve intelligent toll collection, has become the current effective way of traffic management.


This product is mainly installed in the toll station at the top of the automatic toll lane, it’s used to remind the driver of this automatic toll lane information status. The screen can store 100pcs instructions, through the password keyboard automatically select the lane of the passage of the state, flexible, simple and easy to operate. The screen can display three colors, green shows the normal flow of instructions, the red display forbidden instruction, yellow display warning reminder instructions. At the same time, it can also release some humanized and friendly information, such as: careful driving, pay attention to safety, please do not fatigue driving, holiday greetings and so on.



Product Features



1. Long viewing distance, the display can be seen clearly over 200 meters far away.

2. ETC lane control signs with automatic and manual dimming function. In the automatic dimming mode, the signs can adjust the brightness according to environment, in order to avoid the formation of glare when the illumination is low in the night and affect the information reading. In the manual dimming mode, the display brightness can be adjusted by the controller or computer;

3. ETC lane control signs can be remotely controlled by the computer, but also can work offline, directly switch built-in display message through the matching controller;

4. Updating the lane control signs built-in playlist through the computer network remote control;

5. 32 levels of manual brightness adjustment, or automatic brightness adjustment.



Product Parameters



Display Dimension

2500mm*500mm

Outline dimension

2580mm*580mm*150mm

Composition

4R2G

Lane control sign dimension

500mm*500mm

Red X pixel cluster specification

C26-4R pixel cluster

Red X pixel cluster quantity

44

Green ↓ pixel cluster specification

C26-3G pixel cluster

Green ↓ pixel cluster specification

32

Display brightness

12000cd/m2

Viewing distance

> 200m(dynamic)

Viewing angle

30°

Drive mode

static

Environment temperature

-30℃ to 70℃

Environment humidity

5% to 95%RH

Max power

680W

Lifetime

100000h

Fault-free time

50000h

Waterproof level(front/back)

IP65/IP54

Communication methods

RS232/RJ45/TCPIP


Applications





"This product is mainly installed in the toll station at the top of the automatic toll lane, it’s used to remind the driver of this automatic toll lane information status.The screen can display three colors, green shows the normal flow of instructions, the red display forbidden instruction, yellow display warning reminder instructions."




Keyword: Pixel Tube LED Variable Speed Limit board,Pixel Tube LED Variable Speed Limit signal,Pixel Tube LED Variable Speed Limit indicator

Page Link: http://www.glare-led.com/h-pd-44-176_522.html